Inner Melbourne

Rendering
Melbourne CBD

Rendering for apartment towers, commercial facades and mixed-use buildings in Melbourne's CBD. In Melbourne CBD we work on high-rise apartments, mixed-use towers and heritage commercial buildings. The area's exposed to wind tunnels and reflected heat between towers, so the right render choice matters.

We specify finishes that suit acrylic and texture systems that handle thermal movement and high-rise access.

Book a free quoteCall 0405 337 051

What we install

Systems for Melbourne CBD

The same six systems we apply across Melbourne, specified to the substrate and exposure we see in Melbourne CBD.

01

Acrylic Rendering

Pre-coloured, polymer-modified render that flexes with the building instead of fighting it.

02

Sand & Cement Rendering

The traditional mix, built up in stages, keyed properly and floated dead flat.

03

Texture Coating & Stucco

Rollcoat, sponge, fine sand and rough cast — matched off an existing wall so the join disappears.

04

Render Repairs & Recoating

Drummy sections cut out, cracks raked and bridged, patches colour-matched — often a fraction of a full re-render.

05

Heritage & Lime Render

Breathable lime coats for solid-brick period homes, where modern sealed render traps moisture and blows the masonry apart from inside.

06

Hebel, Foam & Lightweight Cladding Render

Render systems specified for Hebel, polystyrene and lightweight cladding substrates — where the coating is part of the wall system, not a finish on top of it.

Why Invision

Local experience in Melbourne CBD

We have been rendering Melbourne facades for more than 20 years. That experience shows in the prep work — masking, keying, patching and curing — before the top coat goes on.

In Melbourne CBD, where high-rise apartments, mixed-use towers and heritage commercial buildings, we choose the system that matches the wall, not just the colour. Every job gets a site visit, a written itemised quote and a 10-year coating system warranty.

If you are in Melbourne CBD and want to refresh a facade, repair drummy render or match an existing texture on an extension, we can look at it and give you a clear quote.

Common questions

Rendering in Melbourne CBD

How much does rendering cost in Melbourne CBD?

Most Melbourne CBD facade jobs land between roughly $40 and $90 per square metre depending on the system, substrate condition and access. We price every job after a site visit — see our Melbourne rendering cost guide for the full breakdown.

Which render suits homes in Melbourne CBD?

In Melbourne CBD we mostly see high-rise apartments, mixed-use towers and heritage commercial buildings, so the choice usually comes down to acrylic for modern cavity walls and breathable lime for solid-brick period homes. We recommend the system after sounding the wall, not before.

Do you do render repairs in Melbourne CBD?

Yes. Drummy sections cut out, cracks bridged and the elevation recoated is a large part of our Melbourne CBD work, and it usually costs a fraction of a full re-render.

How soon can you quote a job in Melbourne CBD?

Usually within a few days. Call us or send the form with a couple of photos and we will book a site visit and follow up with a written itemised quote.

Get a quote for Melbourne CBD

Call us directly or send the details through the form. We will reply with a time for a site visit and a written quote.

Call 0405 337 051Send an enquiry